Copier D014/D015/D078/D079
D014/D015/D078/D079 1-22 SM
Obey local laws and regulations concerning the disposal of items such as the
empty bottles.
If you experience any problem with developer filling, go to Section 3 and do
the procedures described under "Handling Problems with Developer Filling" in
the "PCU" section.
18. Locate the transfer belt release lever [A]. (It was removed earlier with the shipping tape,
and should already have been installed on the shaft in step 2.)
19. Attach the transfer belt release lever as shown above and turn it to the vertical position
and make sure that it locks.
To Next Page
Loading...
