Differences Between the D014/D015 & B132/B200
SM D-1 D014/D015/D078/D079
NEW FEATURES OF D014/D015
RESPONSES TO REQUESTS FOR IMPROVEMENT
This section describes changes that were implemented in response to requests for
improvement in the performance of the B132/B200.
IMPROVED PRODUCTIVITY
Copy Speed
Mode B132/B200 D014/D015
K B132/B200: 60 cpm
D014: 60 cpm
D015: 75 cpm
FC B132/B181: 45 cpm D014: 55 cpm
B200: 55 cpm D015: 70 cpm
Copying speed has been improved due to:
1. PxP toner with a lower melting point.
2. Better fusing control. This was achieved with a more efficient ac power supply to the
fusing unit.
Shorter Warm-up Time
B132/B200 D014/D015
300 sec.
D014 NA: 90 sec.
D014/D015 EU: 75 sec.
D015 NA: 75 sec.
The shorter warm-up time was achieved by:
Adopting a sponge hot roller for fusing; the nip is wider, so the fusing temperature is
lower
Adopting an extremely thin heating roller used at lower temperature
To Next Page
Loading...
