Differences Between the D014/D015 & B132/B200
SM D-9 D014/D015/D078/D079
Fusing Lamp Rearrangement in the Heating Roller
The layout of the fusing lamps has been rearranged to ensure a more efficient distribution of
heat.
In the Heating Roller:
Lamp { heats the entire length of the fusing belt.
Lamp | heats only the ends of the fusing belt. (Used only for large paper sizes.)
Lamp } heats only the center of the fusing belt. (Used for smaller, thick paper sizes;
lamp | is not used.)
This allows better control of the heat applied to the fusing belt, based on the requirements of
the paper size and paper type selected for the job.
To Next Page
Loading...
