Ricoh D014 - Finisher B830

SM i B830
FINISHER B830
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT.............................................1
1.1 COVERS.......................................................................................................1
1.1.1 FRONT DOOR, INNER COVER..........................................................1
Front Door................................................................................................1
Left Inner Cover .......................................................................................1
Inner Cover ..............................................................................................1
1.1.2 SIDE TABLE AND UPPER TRAY........................................................2
1.1.3 LEFT COVERS, REAR COVER ..........................................................3
1.1.4 TOP COVER........................................................................................3
1.1.5 SHIFT TRAY........................................................................................3
1.1.6 JOGGER UNIT COVER.......................................................................4
1.2 ROLLERS.....................................................................................................5
1.2.1 DRAG ROLLER...................................................................................5
1.2.2 POSITIONING ROLLER......................................................................6
1.2.3 ALIGNMENT BRUSH ROLLER...........................................................7
1.3 JOGGER FENCE .........................................................................................8
1.4 SENSORS ....................................................................................................9
1.4.1 PAPER HEIGHT SENSORS................................................................9
1.4.2 EXIT GUIDE HP SENSOR ................................................................10
1.4.3 UPPER TRAY FULL AND EXIT SENSORS ......................................11
Upper Tray Full Sensor..........................................................................11
Upper Tray Exit Sensor..........................................................................11
1.4.4 SHIFT TRAY EXIT SENSOR.............................................................12
1.4.5 ENTRANCE AND STAPLER TRAY ENTRANCE SENSORS............13
Entrance Sensor ....................................................................................13
Stapler Tray Entrance Sensor................................................................13
1.4.6 MAIN BOARD, PRE-STACK PAPER SENSOR ................................14
1.4.7 STAPLE TRIMMINGS HOPPER FULL SENSOR..............................16
1.4.8 STAPLER ROTATION HP AND STAPLER RETURN SENSORS............17
1.5 STAPLER ...................................................................................................18
1.6 SHIFT TRAY...............................................................................................19
1.6.1 SHIFT TRAY EXIT, SHIFT TRAY LIFT MOTOR ...............................19
Shift Tray Exit Motor...............................................................................19
Shift Tray Lift Motor................................................................................20
1.6.2 DRAG ROLLER/DRAG DRIVE MOTORS,
DRAG DRIVE HP SENSOR ........................................................21
1.6.3 SHIFT MOTOR AND SENSORS .......................................................24
1.6.4 JOGGER TOP FENCE MOTOR........................................................25
1.6.5 JOGGER UNIT ..................................................................................26
1.6.6 JOGGER BOTTOM FENCE MOTOR................................................27
1.7 PUNCH UNIT..............................................................................................28
1.7.1 PUNCH POSITION ADJUSTMENT...................................................28
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA