Ricoh D014 - Installation

Copy Tray (B756)
D014/D015/D078/D079 1-36 SM
1.4.2 INSTALLATION
1. Remove the left upper cover [A] ( x 2).
2. Attach the paper height sensor [A] and harness clamp [B] to the sensor bracket [C].
3. Attach the sensor bracket and actuator arm bracket [D] to the copier ( x 3).
4. Attach the sensor harness [E] ( x 1, = x 4).
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA