Common Procedures
SM 3-19 D014/D015/D078/D079
Replacement
Adjustment
3.2.9 DRAWER UNIT
To pull out the drawer unit:
1. Remove the front door.
2. Rotate the lever [A] down to left until it stops.
3. Grip the lever to pull the unit [B] out of the machine until it stops.
To remove the drawer unit:
The drawer unit is very heavy (30 kg/66lb.).
1. Disconnect the left rail [A] ( x2).
2. Disconnect the right rail [B] ( x2).
3. Lift the unit off the rails.
4. Push the rails into the machine.
To re-install the drawer unit
To Next Page
Loading...
