Differences Between the D014/D015 & B132/B200
D014/D015/D078/D079 D-8 SM
Elimination of Pawl Marks on Prints
A new fusing belt stripper eliminates shiny stripper marks on prints.
A new stripper plate has been designed to strip copies that occasionally stick to the
fusing belt. The points of the stripper plate are flat PFA resin plates, not sharp points.
The new PxP toner, which contains a new type of wax, separates more easily from the
belt so the sheet is less likely to stick to the fusing belt.
The new soft-sponge material of the hot roller also means that paper is less likely to
stick to the fusing belt.