Copier D014/D015/D078/D079
SM 1-29 D014/D015/D078/D079
Installation
7. Touch [Start Scanning] on the display. The machine scans the pattern one time.
Scanning…
Please wait.
If you see this error:
Scanning failed.
Place test pattern on the exposure glass correctly.
Then press [Start Scanning].
Make sure that the arrow on the test pattern is in the upper left corner of the exposure
glass.
8. Remove the pattern from the exposure glass and replace it with the C-4 Color Chart.
9. Touch "Exit" three times to return to the Copy mode screen.
10. Make a full-color copy of the test chart.
11. Compare the results of the 1st copy (made in step 3 of "Make a Test Color Print") and
the 2nd copy (made in step 10 above):
If the results of the 2nd copy are better than the results of the 1st copy, you are
finished.
-or-
If the results of the 2nd copy are worse than the results of the 1st copy:
Push the [User Tools] key
Touch Maintenance> Auto Color Calibration> Previous Setting.
12. Remove the color chart from the exposure glass.
13. If the customer is not satisfied with the 1st copy or the 2nd copy, you must do the
printer gamma adjustment (see Printer Gamma Correction in Replacement and
Adjustment in the B132/B200 service manual).
Do the Color Registration Procedure for MUSIC
1. Push [User Tools].
2. Touch [Maintenance]> [Color Registration].
3. Touch [OK].
This completes color registration.
To Next Page
Loading...
