Group 1000
D014/D015/D078/D079 5-18 SM
1301 Paper Type Detect
These SP settings switch the on/off the paper type detection function.
Two sensors, one mounted above and one below the paper at the registration
rollers, detect the opacity of the first sheet and compares this reading for every
subsequent sheet. If the reading is higher (thicker paper) or lower (thinner paper),
the sensor triggers an error.
[0 to 1/1]
0: Enable, 1: Disable
1 Tray 1
2 Tray 2
3 Tray 3
4 Tray 4
Japan Only
5 Bypass Tray
6 LCT B473
7 Wide LCT D359
To Next Page
Loading...
