Group 1000
SM 5-19 D014/D015/D078/D079
Service
Tables
1302 Double-Feed Detect
These SP settings switch the on/off the double-feed detect function.
[0 to 1/1]
0: Enable, 1: Disable
Two sensors, one mounted above and one below the paper at the registration
rollers, detect the opacity of the first sheet and compares this reading for every
subsequent sheet. If the reading is higher (thicker paper) or lower (thinner paper),
the sensor triggers an error.
1 Tray 1
2 Tray 2
3 Tray 3
4 Tray 4
Japan Only
5 Bypass Tray
6 LCT
7 Wide LCT
1902 CPM Down Set
1 Custom (0:Off 1:On)
2 Pre-Punch (0:Off 1:On)
To Next Page
Loading...
