Ricoh D014 - Finisher Installation

SR 5000 (B830) Finisher Installation
SM 1-103 D014/D015/D078/D079
Installation
1.13.5 FINISHER INSTALLATION
SR 5000 (B830) FINISHER INSTALLATION
 Turn the machine off and disconnect the machine power cord before you do this
procedure.
1. Unplug the machine power cord before starting the following procedure.
2. Unpack the finisher and remove all tapes and shipping retainers.
3. Open the front door and remove the shipping retainers.
4. Remove the brackets, tags, and wires in this order: [A], B], [C] ( x 2 each).
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA