SR 5000 (B830) Finisher Installation
SM 1-105 D014/D015/D078/D079
Installation
Docking the Finisher B830
The Finisher (B830) is docked to:
Z-folding unit (if the Booklet Finisher B836 is not installed)
Cover Interposer tray (if Booklet Finisher B836 and Z-Folding Unit B660 are not
installed)
Copier (if Z-Folding Unit B660 and Cover Interposer Tray B835 are all not installed.)
Finisher B830 to Z-Folding Unit B660
1. Fasten the joint bracket to the Z-Folding Unit B660.
2. Dock the finisher. (Go to 'Connecting the Finisher B830'.)
To Next Page
Loading...
