Cover Interposer Tray CI5000 (B835)
D014/D015/D078/D079 1-136 SM
Finisher B830 to Cover Interposer Tray B835
1. Fasten the joint bracket to the Cover Interposer Tray B835.
2. Dock the finisher.
Firmware Update
Install the latest version of the firmware for the cover interposer tray.
The cover interposer may not operate correctly with the D014/D015/D078/D079 unless the
most recent version of the firmware is installed.
North America Only
When the Cover Interposer Tray (B835) is installed, be sure to check the FCC Class-A
decal is attached to the copier below its serial number decal.
This decal is included with the Finisher Adapter (D375) because the Cover Interposer Tray
CI5000 (B835) is always installed with Finisher Adapter (D375) and the 3000-Sheet
Finisher (B830).
For more details see "3000-Sheet Finisher (B830), Finisher Adapter (D375)" in section "1.
Installation".
To Next Page
Loading...
