Z-Folding Unit ZF4000 (B660)
D014/D015/D078/D079 1-142 SM
Do Steps 8 and 9 only when the Z-Folding Unit (B660) is installed with Cover
Interposer Tray (B835).
8. Replace the entrance guide plate [A] with the longer guide plate [B] provided with the
accessories ( x 2).
9. Attach the mylar [C] (from the accessories for the Cover Interposer B835) as shown in
the illustration only to the guide plate provided with the Cover Interposer Tray B835.
Testing the Breaker
1. The breaker switch is at the lower right side of the Z-folder. Confirm that the manual
breaker switch [A] is set to the right.
To Next Page
Loading...
