Common Procedures
D014/D015/D078/D079 3-20 SM
1. Remove the right upper cover and the left upper cover.
2. Open the front door.
3. Pull out the left rail and right rail.
4. Set the unit on the rails.
The drawer unit is very heavy (30 kg/66lb.). Make sure that hooks are
engaged with the holes in the rails.
5. Slowly push the unit into the machine until it stops.
6. Rotate the lever [A] to the vertical position.
7. Fasten the screws to the left rail [B] ( x2).
8. Fasten the screws to the right rail [C] ( x2).
9. To ensure that the unit is positioned correctly, check each screw and confirm that it is
fastened tightly.
To Next Page
Loading...
