Error Codes
SM 17 D356
D356
Fax Option
Type C7500
Code Meaning Suggested Cause/Action
0-06
The other terminal did
not reply to DCS
Check the line connection.
Check the FCU - NCU connectors.
Try adjusting the tx level and/or cable
equalizer settings.
Replace the NCU or FCU.
The other end may be defective or
incompatible; try sending to another
machine.
Check for line problems.
Cross reference
See error code 0-04.
0-07
No post-message
response from the other
end after a page was
sent
Check the line connection.
Check the FCU - NCU connectors.
Replace the NCU or FCU.
The other end may have jammed or run out of
paper.
The other end user may have disconnected
the call.
Check for a bad line.
The other end may be defective; try sending to
another machine.
To Next Page
Loading...
