Bit Switches
SM 83 D356
D356
Fax Option
Type C7500
System Switch 19 (SP No. 1-101-026)
No Function Comments
0-5 Not used Do not change the settings.
6
Extended scanner page
memory after memory option is
installed
0: Disabled
1: Enabled
0: After installing the memory expansion option,
the scanner page memory is extended to 4 MB
from 2 MB.
1: If this bit is set to 1 after installing the
memory expansion option, the scanner page
memory is extended to 12 MB. But the SAF
memory decreases to 18 MB.
7
Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit
a form or letterhead which has a colored or
printed background, change this bit to "1".
"Original 1" and "Original 2" can be selected in
addition to the "Text", "Text/Photo" and "Photo"
modes.
System Switch 1A (SP No. 1-101-027)
No Function Comments
0
to
7
LS RX memory capacity
threshold setting
00-FF (0-1020 Kbyte: Hex)
Sets the value to x4KB. When the amount of
available memory drops below this setting, RX
documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
To Next Page
Loading...
