Service Call Tables
D014/D015/D078/D079 4-22 SM
SC350 B Developer Fill Error: K
SC351 B Developer Fill Error: M
SC352 B Developer Fill Error: C
SC353 B Developer Fill Error: Y
The PCU failed to fill with developer from the developer bottle when
SP3814-1 was executed.
Developer bottle not set correctly
Developer in the bottle is clogged and not flowing
Note: For detailed information about how to handle problems developer
filling, see "Handling Problems with Developer Filling" under "PCU" in
Section 3.
SC360 D TD sensor (Vt high) error: K
SC361 D TD sensor (Vt high) error: M
SC362 D TD sensor (Vt high) error: C
SC363 D TD sensor (Vt high) error: Y
The Vt value of the black, magenta, cyan, or yellow TD sensor exceeds
0.5V for 10 counts.
Black, magenta, cyan, or yellow TD sensor disconnected
Harness between TD sensor and PCU defective
Defective TD sensor, replace the PCU
Note: The TD sensor cannot be replaced independently. The PCU must
be replaced if the TD sensor is defective.
To Next Page
Loading...
