Ricoh D014 - Page 670

Group 3000
D014/D015/D078/D079 5-128 SM
3811 DevSetup Execute
Execute Developer Setup
Do this SP during the installation procedure after the developer and toner
cartridges have been installed in the machine, or after the drum and cleaning
blade have been replaced. This SP:
 Checks and confirms each PCU is installed and filled with developer.
 Switches on toner supply and sends toner to the sub hopper of each
PCU.
 Sends toner to the PCU to coat the drum with toner. This prevents the
cleaning blades from bending and scouring the drums.
 Initializes the TD sensors.
 Starts the process control self-check to set the target for development
gamma and adjusts toner density.
 Starts the MUSIC sequence to check and correct color image offset.
Note:
 After doing SP3811, always do SP3812 to confirm that SP3811
executed correctly.
 SP3811 001 is done only at machine installation, or after a drum and
cleaning blade has been replaced in the PCU.
 SP3801 001 to 006 is done after developer replacement for one or
more PCUs.
1 Devr Setup:All
2 Devr Setup:Col
3 K
4 M
5 C
6 Y
[0 to 1/1]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA