Group 5000
D014/D015/D078/D079 5-168 SM
Sets the length of time for monitoring the frequency of access to MFP
features.
[10 to 30/10/1 sec.]
3
Productivity Fall Waite
Sets the wait time to slow down the speed of certification when an
excessive number of access attempts have been detected.
[0 to 9/3/1 sec.]
4
Attack Max Number
Sets a limit on the number of requests received for certification in order to
slow down the certification speed when an excessive number of access
attempts have been detected.
[50 to 200/200/1 attempt]
5420 User Authentication
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has
been enabled.
1
Copy
Determines whether certification is required before a user can use the
copy applications.
[0 to 1/0/1]
0: On
1: Off
2: Color Security Setting
2
Color Security Setting
Bit0: Black& White Mode 1: Enable / 0: Disable (0)
Bit3: Full Color Mode 1: Enable / 0: Disable (0)
Bit4: Auto Color Select Mode 1: Enable / 0: Disable (0)
NOTE: Enabling the SP Mode (Value=1) for Bit 4, diables the login dialog
for that color.
Rev. 04/16/2009
⇒
To Next Page
Loading...
