Ricoh D014 - Page 756

Group 5000
D014/D015/D078/D079 5-214 SM
5844 USB
Transfer Rate
1
Sets the speed for USB data transmission.
[Full Speed]
[Auto Change]
Vendor ID
2
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000 to 0xFFFF/1] DFU
Product ID
3
Sets the product ID.
[0x0000 to 0xFFFF/1] DFU
Device Release Number
4
Sets the device release number of the BCD (binary coded decimal) display.
[0000 to 9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as BCD.
5845 Delivery Server Setting
These are delivery server settings.
FTP Port No.
1
[0 to 65535/1]
IP Address
2
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be used with the initial system setting.
[0 to FFFFFFFF/1]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA