Group 8000
SM 5-313 D014/D015/D078/D079
Service
Tables
L:FIN Jobs [0~9999999/ 1]
8066
These SPs total finishing methods for jobs output from within the document
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
O:FIN Jobs [0~9999999/ 1]
8067
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Booklet
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
806x 5 Z-Fold
Number of jobs started In any mode other than the Booklet mode
and set for folding (Z-fold).
806x 6 Punch
Number of jobs started in Punch mode. When Punch is set for a
print job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
T:Jobs/PGS [0~9999999/ 1]
8071
These SPs count the number of jobs broken down by the number of pages in
the job, regardless of which application was used.
C:Jobs/PGS [0~9999999/ 1]
8072
These SPs count and calculate the number of copy jobs by size based on the
number of pages in the job.
To Next Page
