Printer Service Mode
SM 5-353 D014/D015/D078/D079
Service
Tables
5.10 PRINTER SERVICE MODE
5.10.1 SP1-XXX (SERVICE MODE)
1001 Bit Switch
Bit Switch 1 0 1 Default
bit 0 DFU (Design or Factory Use) - - 0
bit 1 DFU - - 0
bit 2 DFU - - 0
No I/O Timeout
Disabled Enabled 0
bit 3
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting
will have no affect. I/O Timeouts will never occur.
SD Card Save Mode
Disabled Enabled 0
bit 4
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not
output to paper.
bit 5 DFU - - 0
bit 6 DFU - - 0
[RPCS,PCL]: Printable area frame border
Disabled Enabled 0
001
bit 7
Prints all RPCS and PCL jobs with a border around the printable area.
1001 Bit Switch
Bit Switch 2 0 1 Default
bit 0 DFU - - 0
bit 1 DFU - - 0
Applying a collate Type
Shift
Collate
Normal
Collate
0
bit 2
A collate type (shift or normal) will be applied to all jobs that do not explicitly
define a collate type. Note: If #5-0 is enabled, this Bit Switch has no effect.
[PCL5e/c,PS]: PDL Auto Switching
Enabled Disabled 0
bit 3
Enables/Disables the MFPs ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto
PDL switching is disabled, these jobs will not be printed properly.
002
bit 4 DFU - - 0
Rev. 05/12/2009
⇒
To Next Page
Loading...
