Printer Service Mode
SM 5-355 D014/D015/D078/D079
Service
Tables
bit 4 DFU - - 0
bit 5 DFU - - 0
bit 6 DFU - - 0
bit 7 DFU - - 0
1001 Bit Switch
Bit Switch 5 0 1 Default
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
Disabled Enabled 0
bit 0
If enabled, users will be able to configure a Collate Type, Staple Type, and
Punch Type from the operation panel. The available Types will depend on the
device and configured options. After enabling this Bit Switch the settings will
appear under: "User Tools > Printer Features > System"
bit 1 DFU - - 0
bit 2 DFU - - 0
[PS]:PS Criteria
Pattern3 Pattern1 0
bit 3
Change the number of PS criterion used by the PS interpreter to determine
whether a job is PS data or not.
Increase max number of the stored jobs
to 1000 jobs.
Disabled
(100)
Enabled
(1000)
0
bit 4
Changes the maximum number of jobs that can be stored on the HDD
(via Job Type setting) to 1000. The default is 100.
Face-up output
Disabled Enabled
(Face-up)
0
bit 5
All print jobs will be output face-up in the destination tray.
bit 6 DFU - - 0
005
bit 7 DFU - - 0
To Next Page
Loading...
