Siemens SIMATIC NET - Page 418

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
418 Configuration Manual, 10/2015, C79000-G8976-C351-05
Syntax
Call up the command with the following parameters:
vap security authentication { show-methods | <methods> }
The parameters have the following meaning:
Parameter
Description
Range of values / note
show-
methods
Lists the available types of
authentication
• open-system
Without authentication. Encryption with a fixed (un-
changing) key can be selected as an option. To ena-
ble the key, use the "
vap security encryption"
command.
• shared-key
A fixed key is stored for authentication.
• wpa (Radius)
WPA authentication.
• wpa-psk
WPA authentication without RADIUS server.
• wpa2 (Radius)
WPA2 authentication.
• wpa2-psk
WPA2 authentication without RADIUS server.
• wpa-wpa2-auto (Radius)
WPA and WPA2 authentication
• wpa-wpa2-auto-psk
WPA and WPA2 authentication without a RADIUS
server
methods
Value corresponding to an
authentication method.
Result
The type of authentication is specified.
Further notes
You display the settings with the show wlan security <vapX 0/Y> command.