Configuration
3.2 Load and Save
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
68 Configuration Manual, 10/2015, C79000-G8976-C351-05
WLANServC
ert
(in client
Server certificate. X X X
WLANSigRe
c
(in client
mode only)
The zip file contains the following:
• csv file with the measured values of the signal
recorder
• pdf file with the measured values and an addi-
tional graphic representation of the measured
values.
You will find information about the measured val-
ues and their graphic representation in the section
"Signal recorder (Page 94)".
-- X X
WLANSpec-
trumAnalyz-
er
(Only in
access point
The Zip file contains a csv file with the measured
values of the spectrum analyzer.
You will find information about the measured val-
ues and their graphic representation in the section
"Auto-Hotspot".
-- X X
Table 3- 2 TFTP
ConfigPack Detailed configuration information. for example, start
configuration, users, certificates
X X
CountryList The zip file contains the country list as a csv and as a
X --
This file contains information for Siemens Support.
EDS Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the
X --
Firmware Loading firmware updates X X
Information on the device properties (PNIO)
File with entries from the event log table
Private MSPS MIB file "Scalance_w_msps.mib"
RunningCLI This file contains an overview of the current configura-
tion in the form of CLI commands. You can download
the text file. The file is not intended to be uploaded
X --
File with user names and passwords
To Next Page
Loading...
Need help?
General
