Siemens SIMATIC NET Configuration Manual

Configuration
3.2 Load and Save
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
80 Configuration Manual, 10/2015, C79000-G8976-C351-05
The parameters have the following meaning:
Parameter
Description
Range of values /
note
showfiles
Shows the available files
-
filetype
Shows that the file type follows that will be loaded -
filetype
Name of the file type
max. 100 characters
Result
The password is disabled.
Further notes
You enable the password for certificates with the password command.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols