Revision history RM0367
1032/1043 RM0367 Rev 7
19-Feb-2016
4
(continued)
Code examples
Updated Section A.3.7: Program Option byte code example and
Section A.3.9: Program a single word to Flash program memory code
example, Section A.3.10: Program half-page to Flash program
memory code example and Section A.3.11: Erase a page in Flash
program memory code example.
Updated Appendix A.8.2: ADC enable sequence code example,
Section A.8.5: Single conversion sequence code example - Software
trigger, Section A.8.6: Continuous conversion sequence code
example - Software trigger, Section A.8.7: Single conversion
sequence code example - Hardware trigger, Section A.8.8:
Continuous conversion sequence code example - Hardware trigger,
Section A.8.11: Wait mode sequence code example, Section A.8.12:
Auto off and no wait mode sequence code example, Section A.8.13:
Auto off and wait mode sequence code example, Section A.8.14:
Analog watchdog code example and Section A.8.16: Temperature
configuration code example.
Updated Section A.11.4: Input capture data management code
example and Section A.11.10: ETR configuration to clear OCxREF
code example.
Updated Section A.15.1: RTC calendar configuration code example,
Section A.15.5: RTC calibration code example and Section A.15.7:
RTC tamper and time stamp code example.
Updated Section A.17.3: USART transfer complete code example,
Section A.17.6: USART LIN mode code example, Section A.17.7:
USART synchronous mode code example, Section A.17.8: USART
single-wire half-duplex code example, Section A.17.9: USART
smartcard mode code example, Section A.17.10: USART IrDA mode
code example, Section A.17.11: USART DMA code example and
Section A.17.12: USART hardware flow control code example.
Table 181. Document revision history (continued)
Date Revision Changes
To Next Page
Loading...
Need help?
General
