R&S ZNB Series - Page 1149

Command reference
R&S
®
ZNB/ZNBT
1149User Manual 1173.9163.02 ─ 62
Example:
MMEM:LOAD:CKIT:UDIR 'C:\Users\Public\Documents
\Rohde-Schwarz\Vna\Calibration\Kits\Autoload'
Specifiy the directory for additionally available cal kits.
MMEM:MDIR 'C:\Users\Public\Documents
\Rohde-Schwarz\Vna\Calibration\Kits\Autoload'
Create the specified "Autoload" directory.
MMEM:STOR:CKIT 'New Kit 1', 'C:
\Users\Public\Documents
\Rohde-Schwarz\Vna\Calibration\Kits\Autoload
\New Kit 1.calkit'
Store the data for the existing, user-defined cal kit "New Kit 1" to
the "Autoload" directory.
Manual operation:
See "Search Path for additional Cal Kits and Connector Types"
on page 755
MMEMory:LOAD:CMAP
<ColorSchemeFile>
MMEMory:LOAD:CMAP:HCOPy <ColorSchemeFile>
Loads a color scheme from a the VNA color scheme file and activates it as the user-
defined color scheme for display or printing (HCOPy).
Setting parameters:
<ColorSchemeFile> String parameter to specify the name and directory of the color
scheme file to be loaded. The default extension (manual control)
for color scheme files is *.ColorScheme, although other exten-
sions are allowed.
Example:
MMEM:LOAD:CMAP 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\ColorSchemes\
Test.ColorScheme'
Load the previously created color scheme file
Test.ColorScheme from the default color scheme directory.
DISP:CMAP13:RGB 1,0,0; :DISP:CMAP14:RGB 0,1,0
Color the first trace red, the second trace green.
MMEM:STOR:CMAP 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\ColorSchemes\
Test.ColorScheme'
Store the data for the user-defined cal kit "Newkit" and overwrite
the cal kit file New_kit.calkit.
Usage:
Setting only
Manual operation: See "Recall... / Save..." on page 746
MMEMory:LOAD:CORRection <Channel>[, <CalGroupFile>]
Applies a system error correction data set stored in the cal pool (cal group file) to chan-
nel <Channel>.
SCPI command reference