GUI reference
R&S
®
ZNB/ZNBT
775User Manual 1173.9163.02 ─ 62
Print
Allows you to print the "Summary" of the executed tests, similar to the Print... function-
ality of the system "Info" dialog.
Report
Same functionality as Create R&S Support Information in the system "Info" dialog.
5.18.1.5 Service Function dialog
The "Service Function" dialog gives access to the service functions of the instrument.
Access: [Setup] > "Setup" > "Service Function..."
Most of the service functions require a service level > 0 that is protected by a pass-
word. Those service functions should be used by a Rohde & Schwarz service repre-
sentative only. Refer to the service manual for more information.
Password
Enter a password here to activate the required service level.
Setup softtool
To Next Page
Loading...
