R&S ZNB Series User Manual

GUI reference
R&S
®
ZNB/ZNBT
361User Manual 1173.9163.02 ─ 62
Remote command:
CALCulate<Chn>:STATistics:DOMain:USER
CALCulate<Chn>:STATistics:DOMain:USER:STARt
CALCulate<Chn>:STATistics:DOMain:USER:STOP
Range Limit Lines On
Displays or hides the range limit lines in the diagram area. Range limit lines are two
vertical lines at the Start and Stop values of the active evaluation range ("Range 1" to
"Range 10").
Remote command:
CALCulate<Chn>:STATistics:DOMain:USER:SHOW
5.5.9 Smooth Shift Hold tab
Provides various functions to modify the entire measured trace.
●
The analyzer can export the raw complex (unformatted) data or formatted data.
The unformatted data are independent of all "Smooth Shift Hold" settings; see
"Formatted Values" on page 370.
●
For complex traces, if marker format and trace format do not coincide, the marker
values are calculated before Smoothing and Hold are applied. In this case, the dis-
played marker values may not behave as expected.
Trace Config softtool

R&S ZNB Series Specifications

General

Brand	R&S
Model	ZNB Series
Category	Measuring Instruments
Language	English