R&S ZNB Series User Manual

GUI reference
R&S
®
ZNB/ZNBT
341User Manual 1173.9163.02 ─ 62
Show <Mem>
Shows or hides the active memory trace or the first memory trace of the active data
trace.
If no memory trace is associated with the active data trace, "Show <Mem>" is disabled.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
5.5.3 All Mem All Data tab
Performs actions on all data or memory traces in the active recall set.
Background information
Refer to "Trace types" on page 103.
All Data to <Destination>
Stores the current data of all data traces in the active recall set to memory traces, in
accordance with the Destination setting. No trace functions are applied to the stored
traces.
Remote command:
TRACe:COPY
All Data & Func to <Destination>
Stores the current data of all data traces in the active recall set to memory traces, in
accordance with the Destination setting. Trace functions are applied to the stored
traces.
For information on trace functions, see "Data & Func to <Destination>" on page 340.
All Data to <Destination> stores the raw trace without the trace functions, "All Data &
Func to <Destination>" stores the trace after it has been transformed using trace func-
tions.
Trace Config softtool

R&S ZNB Series Specifications

General

Brand	R&S
Model	ZNB Series
Category	Measuring Instruments
Language	English