To Next Page

To Previous Page

Command reference

R&S

ZNB/ZNBT

1463User Manual 1173.9163.02 ─ 62

Manual operation: See "Recommended Calibration Interval" on page 770

DIAGnostic:SERVice:DATE <ServiceDate>

Defines the last date and time the instrument was serviced (ISO 8601 format).

Parameters:

<ServiceDate> String containing last service date.

Example: //Return last service date

DIAG:SERV:DATE?

Manual operation: See "Last Service" on page 770

DIAGnostic:SERVice:STATe?

Queries the state if the instrument requires service.

Return values:

<ServiceState> NAN

Not a number, e.g. if no service date is set.

Instrument is OK. No service is needed.

DEViations

Deviations have been detected. Service might be required soon.

REQuired

Instrument requires service.

Example: //Return service state

DIAG:SERV:STAT?

Usage: Query only

7.5 R&S ZVR/ZVABT compatible commands

The commands in this chapter are supported for compatibility with analyzers of the

R&S ZVR and R&S ZVAB family; they do not introduce any new functionality. For new

programs, it is recommended to use the commands in Chapter 7.3, "SCPI command

reference", on page 843.

CALCulate<Chn>:LIMit:CONTrol:DOMain.......................................................................1464

CALCulate<Chn>:LIMit:RDOMain:COMPlex................................................................... 1465

CALCulate<Chn>:LIMit:RDOMain:FORMat.....................................................................1466

CALCulate<Chn>:LIMit:RDOMain:SPACing.................................................................... 1466

CALCulate<Chn>:LIMit:LOWer:STATe............................................................................1466

CALCulate<Chn>:LIMit:UPPer:STATe............................................................................ 1466

CALCulate<Ch>:PARameter:DEFine..............................................................................1467

CALCulate<Chn>:MARKer<Mk>:FUNCtion:BWIDth........................................................ 1468

CALCulate<Chn>:MARKer<Mk>:FUNCtion:DELTa:STATe................................................ 1469

R&S ZVR/ZVABT compatible commands

R&S ZNB Series User Manual

Questions and Answers: