Concepts and features
R&S
®
ZNB/ZNBT
259User Manual 1173.9163.02 ─ 62
Analyzer Option Minimum source power
R&S ZNB4, 2 ports R&S ZNB4-B22 -85 dBm
R&S ZNB4, 4 ports R&S ZNB4-B24
R&S ZNB8, 2 ports R&S ZNB8-B22
R&S ZNB8, 4 ports R&S ZNB8-B24
R&S ZNB20, 2 ports R&S ZNB20-B22 -60 dBm
R&S ZNB20, 4 ports R&S ZNB20-B24
R&S ZNB26, 2 ports R&S ZNB26, 2 ports
R&S ZNB26, 4 ports R&S ZNB26, 4 ports
R&S ZNB40, 2 ports R&S ZNB40-B22
R&S ZNB40, 4 ports R&S ZNB40-B24
R&S ZNB43, 2 ports R&S ZNB43-B22
R&S ZNB43, 4 ports R&S ZNB43-B24
R&S ZNBT8|20, ports 1 to 4 R&S ZNBT8|20-B21 -80 dBm
R&S ZNBT8|20, ports 5 to 8 R&S ZNBT8|20-B22
R&S ZNBT8|20, ports 9 to 12 R&S ZNBT8|20-B23
R&S ZNBT8|20, ports 13 to 16 R&S ZNBT8|20-B24
R&S ZNBT8|20, ports 17 to 20 R&S ZNBT8|20-B25
R&S ZNBT8|20, ports 21 to 24 R&S ZNBT8|20-B26
R&S ZNBT20|26|40, ports 1 to 4 R&S ZNBT20|26|40-B21 -60 dBm
R&S ZNBT20|26|40, ports 5 to 8 R&S ZNBT20|26|40-B22
R&S ZNBT20|26|40, ports 9 to 12 R&S ZNBT20|26|40-B23
R&S ZNBT20|26|40, ports 13 to 16 R&S ZNBT20|26|40-B24
R&S ZNBT20|26|40, ports 17 to 20 R&S ZNBT20|26|40-B25
R&S ZNBT20|26|40, ports 21 to 24 R&S ZNBT20|26|40-B26
It is also required to configure AGC for a-waves manually (see Chapter 5.12.3.2, "AGC
Manual Configuration dialog", on page 580).
4.7.22 Extended dynamic range
Options R&S ZNB4|8-B52 and R&S ZNB4|8-B54
Hardware options R&S ZNB4|8-B52/-B54 are only available for new R&S ZNB4 and
R&S ZNB8. They extend the dynamic range up to 140 dB (typically 150 dB) for full 2-
port calibrated measurements. Compared to standard R&S ZNB4|8 analyzers, the
Optional extensions and accessories
To Next Page
Loading...
Need help?
General
