R&S ZNB Series - 5.7.8 Info Field tab; 5.7.9 Marker Coupling tab

GUI reference
R&S
®
ZNB/ZNBT
412User Manual 1173.9163.02 ─ 62
A standard application of "Zero Delay at Marker" is correction of the constant delay
caused by the interconnecting cables between the analyzer test ports and the DUT
(line stretch).
Note: "Zero Delay at Marker" modifies the "Offset" parameters and therefore influen-
ces the entire channel.
Remote command:
n/a
5.7.8 Info Field tab
Displays or hides the marker info field and selects it contents. The functions are self-
explanatory.
Background information
Refer to "Marker info field" on page 106
5.7.9 Marker Coupling tab
Allows you to set up and control marker coupling.
Background information
Refer to "Marker coupling" on page 109.
Marker softtool