GUI reference
R&S
®
ZNB/ZNBT
342User Manual 1173.9163.02 ─ 62
Remote command:
CALCulate<Chn>:MATH:MEMorize
Destination
Selects the destination for the All Data to <Destination> and All Data & Func to <Desti-
nation> functions, that operate on all data traces in the active recall set.
●
"Mem":
For each data trace with associated memory traces, the current trace data are cop-
ied to the first associated memory trace, overwriting existing data. For data traces
without associated memory trace, the current trace data are copied to a new mem-
ory trace, associated to this data trace.
●
"New":
For each data trace, the current trace data are copied to a new memory trace,
associated to this data trace.
New memory traces are named "Mem<n>[<Data_Trace>]" with <n> selected by the
analyzer firmware to make trace names unique.
Remote command:
n/a
Show All Data / Hide All Data / Show All Mem / Hide All Mem
Displays or hides all data or memory traces in the active recall set. Hidden traces are
not deleted.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
Delete All Mem
Deletes all memory traces in the active recall set.
Tips:
●
Use the Trace Manager dialog to hide or delete arbitrary sets of traces.
●
Use the UNDO function of the analyzer to restore a trace that was unintentionally
deleted.
Remote command:
CALCulate:PARameter:DELete:MEMory
5.5.4 Math tab
Allows you to define mathematical operations on traces.
Background information
Refer to "Trace types" on page 103.
Trace Config softtool