R&S ZNB Series - Page 971

Command reference
R&S
®
ZNB/ZNBT
971User Manual 1173.9163.02 ─ 62
CALCulate:PARameter:DELete:ALL
Deletes all traces in all channels of the active recall set, including the default trace
Trc1 in channel 1. The manual control screen shows "No Trace".
Example: See CALCulate<Ch>:PARameter:DELete
Usage: Event
Manual operation: See "Delete Trace" on page 335
CALCulate<Ch>:PARameter:DELete:CALL
Deletes all traces in channel no. <Ch>.
Suffix:
<Ch>
.
Channel number
Example: See CALCulate<Ch>:PARameter:DELete
Usage: Event
Manual operation: See "Delete Trace" on page 335
CALCulate<Ch>:PARameter:DELete:CMEMory
Deletes all memory traces in channel <Ch>.
Suffix:
<Ch>
.
Channel number
Usage: Event
CALCulate:PARameter:DELete:MEMory
Deletes all memory traces in all channels.
Usage:
Event
Manual operation: See "Delete All Mem" on page 342
CALCulate<Ch>:PARameter:DELete:SGRoup
Deletes a group of logical ports (S-parameter group), previously defined via
CALCulate<Ch>:PARameter:DEFine:SGRoup.
Suffix:
<Ch>
.
Channel number. <Ch> may be used to reference a previously
defined channel. If <Ch> does not exist, it is generated with
default channel settings.
Example: See CALCulate<Ch>:PARameter:DEFine:SGRoup
Usage: Event
SCPI command reference