R&S ZNB Series - Page 1290

Command reference
R&S
®
ZNB/ZNBT
1290User Manual 1173.9163.02 ─ 62
Parameters:
<Input> DC1 | DC2 | DC3 | DC4
Rear panel connectors DC INPUT 1 ... 4
*RST: DC1
Example: See [SENSe<Ch>:]PAE:TYPE
Manual operation: See "U
m
/U
m1
/U
m2
/" on page 317
[SENSe<Ch>:]PAE:DCINput:SECondary <Input>
Selects the secondary DC INPUT connector for the PAE measurement (used for mea-
surement type "Voltage and Current" only; see example). The main DC input
([SENSe<Ch>:]PAE:DCINput:MAIN) and the secondary DC input must be different
from each other.
Suffix:
<Ch>
.
Channel number
Parameters:
<Input> DC1 | DC2 | DC3 | DC4
Rear panel connectors DC INPUT 1 ... 4
*RST: DC2
Example: See [SENSe<Ch>:]PAE:TYPE
Manual operation: See "U
m
/U
m1
/U
m2
/" on page 317
[SENSe<Ch>:]PAE:PARameters:I <Current>
Defines the constant DC supply current I
0
for the PAE measurement (measurement
type: "Constant Current Source"; see example).
Suffix:
<Ch>
.
Channel number
Parameters:
<Current> *RST: 0 A
Default unit: A
Example: See [SENSe<Ch>:]PAE:TYPE
Manual operation: See "Formula" on page 317
[SENSe<Ch>:]PAE:PARameters:R <Resistance>
Defines the resistance R of the precision resistor used for the PAE measurement
(measurement types: "Constant Voltage Source" or "Voltage and Current"; see exam-
ple).
Suffix:
<Ch>
.
Channel number
SCPI command reference