Bit Switches
D356 112 SM
Communication Switch 0B (SP No. 1-104-012)
No Function Comments
5
Action when there is no fax
number in the programmed
Quick/Speed dials which meets
the requesting terminal's own
fax number
0: Transfer is disabled
1: Transfer is enabled
After the machine receives a transfer request,
the machine compares the last N digits of the
requesting terminal's own fax number with all
the Quick/Speed dials programmed in the
machine. (N is the number programmed in
communication switch 0C.)
0: If there is no matching number programmed
in the machine, the machine rejects the
transfer request.
1: Even if there is no matching number
programmed in the machine, the machine
accepts the transfer request. The result report
will be printed at the transfer terminal, but will
not be sent back to the requesting terminal.
6-7 Not used Do not change the settings.
To Next Page
Loading...
