Bit Switches
SM 113 D356
D356
Fax Option
Type C7500
Communication Switch 0C (SP No. 1-104-013)
No Function Comments
0-4
Number of digits compared to
find the requester's fax
number from the programmed
Quick/Speed Dials when
acting as a Transfer Station
00 – 1F (0 to 31 digits)
After the machine receives a transfer request, the
machine compares the own telephone number
sent from the Requesting Terminal with all
Quick/Speed Dials programmed in the machine,
starting from Quick Dial 01 to the end of the
Speed Dials.
This number determines how many digits from the
end of the telephone numbers the machine
compares.
If it is set to 00, the machine will send the report to
the first Quick/Speed Dial that the machine
compared. If Quick Dial 01 is programmed, the
machine will send the report to Quick 01. If Quick
Dial 01 through 04 are not programmed and Quick
Dial 05 is programmed, the machine will send the
report to Quick 05.
Default setting – 05(H) = 5 digits
5-7 Not used Do not change the settings.
To Next Page
Loading...
