Ricoh D014 - Page 514

Service Call Tables
D014/D015/D078/D079 4-64 SM
Finisher folder plate motor error (D373)
SC761 B
The folder plate moves but is
not detected at the home
position within the specified
time. The 1st detection failure
causes a jam error, and the
2nd failure causes this SC
code.
Folder plate HP sensor disconnected,
defective
Folder plate motor disconnected,
defective
Folder plate motor overloaded due to
obstruction.
Punch movement motor error
SC763 D
Occurs during operation of the
punch unit. The 1st detection failure
causes a jam error, and the 2nd
failure causes this SC code.
Motor harness disconnected,
loose, defective
Motor defective
Paper position sensor slide motor error
SC764 D
Occurs during operation of the
punch unit. The 1st detection failure
causes a jam error, and the 2nd
failure causes this SC code.
Motor harness disconnected,
loose, defective
Motor defective
Fold Unit Bottom Fence Lift Motor Error (D373)
SC765 D
The fold unit bottom
fence did not return to
the home position
within the specified
time.
 Fold bottom fence mechanism overloaded
due to an obstruction
 Fold bottom fence HP sensor connector
loose, broken, defective
 Fold bottom fence HP sensor defective
 Fold bottom fence lift motor connector
loose, broken, defective
 Fold bottom fence lift motor defective
 Main control board defective
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA