Ricoh D014 - Page 517

Service Call Tables
SM 4-67 D014/D015/D078/D079
Trouble-
shooting
Cover Interposer Pickup Motor 1 Error
SC772 D
In the first tray:
 While the pick-up roller motor was on, the pick-up roller HP sensor
did not detect the pick-up roller at the home position within the
specified number of pulses.
 While the pick-up roller motor was on, the pick-up roller HP sensor
did not detect the pick-up roller at the home position above the
specified number of pulses.
Note: In both cases, 1 error count indicates a jam, 2 error counts cause
this SC code.
 The pick-up motor, pick-up roller HP sensor harnesses, connectors
were loose, broken, defective
 Pick-up motor overload due to an obstruction
 Pick-up motor defective
 Pick-up roller HP sensor defective
Cover Interposer Pickup Motor 2 Error
SC773 D
In the second tray:
 While the pick-up roller motor was on, the pick-up roller HP sensor
did not detect the pick-up roller at the home position within the
specified number of pulses.
 While the pick-up roller motor was on, the pick-up roller HP sensor
did not detect the pick-up roller at the home position above the
specified number of pulses.
Note: In both cases, 1 error count indicates a jam, 2 error counts cause
this SC code.
 The pick-up motor, pick-up roller HP sensor harnesses, connectors
were loose, broken, defective
 Pick-up motor overload due to an obstruction
 Pick-up motor defective
 Pick-up roller HP sensor defective
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA