Group 1000
SM 5-15 D014/D015/D078/D079
Service
Tables
1112
Fuser Unit In/Out DFU
Fusing Unit: In/Out: Start Fusing Unit
Determines whether the fusing unit operates during the copy cycle for image
creation and paper feed.
[*1: In] [0: Out]
1113
Fusing SC Issue Time Info DFU
1159 Fusing SC Settings
These SP codes determine whether the fusing unit SC codes are displayed.
1 SC On:1/Off:0 for 3 Jams
This SP determines whether the machine stops
and displays an SC if three consecutive jams occur
in the fusing unit.
[0 to 1/0/1]
0: Disable. SC code is not displayed.
1: Enable. SC code is displayed.
2
SC On:0/Off:1 for No
Fusing Pressure
This SP determines whether an SC is displayed if
the fusing pressure mechanism is not operating.
0: Enable. SC code is displayed.
1: Disable. SC code is not displayed.
Note: A jam does not necessarily occur in the
fusing unit if the pressure roller lift mechanism is
not operating.
To Next Page
Loading...
