Group 2000
D014/D015/D078/D079 5-74 SM
2771 LEdge Cor:Sp1:K
Leading Edge Correction for Special Paper 1: K. Sets the leading edge correction
coefficient when bias is applied as far as allowed by the setting of SP2772 for drum
to image transfer of the image during black and white copying on Special Paper 1.
7 Side1:PTR
8 Side1:SepDC
9 Side1:SepAC
12 Side2:PTR
13 Side2:SepDC
14 Side2:SepAC
[0 to 250/ 1%]
2772 LEdge SWT:Sp1:K
Leading Edge Switch Timing for Special Paper 1: K. Sets the switch off timing
of SP2771. The selected value is the number of mm from the leading edge.
Applies only to printing in black-and-white mode on Special Paper 1.
2 PTR
3 SepDC
4 SepAC
[0 to 30/1 mm]
To Next Page
Loading...
