Group 2000
SM 5-77 D014/D015/D078/D079
Service
Tables
2778 TEdge Cor:Sp1 FC (PTR)
Trailing Edge Correction for Special Paper 1: FC. Sets the strength of the bias
coefficient for the bias applied at the trailing edge when the image is transferred
from ITB to paper. Applied when printing in full-color mode on Special Paper 1.
7 Side1:PTR
12 Side2:PTR
[0 to 250/1%]
2779 TEdge SWT:Sp1 FC (PTR)
Switch Timing for Special Paper 1: FC. Sets the switch timing that determines the
distance from the leading edge where the SP2778 settings are applied during
image transfer from ITB to paper. Applied only when printing in full-color mode on
Special Paper 1.
[-100 to 0/1 mm]
2780 Sp1:K:LLL Special Paper 1: K Very Low
2781 Sp1:K:LL Special Paper 1: K Low
2782 Sp1:K:ML Special Paper 1: K Medium Low
2783 Sp1:K:MM Special Paper 1: K Medium
2784 Sp1:K:MH Special Paper 1: K Medium High
2785 Sp1:K:HH Special Paper 1: K High
These SPs set the paper size correction coefficient for the image to paper
transfer bias threshold values calculated based on the reading of the absolute
humidity from the temperature/humidity sensor and the thresholds set with
SP2304.
SP2780 – Up to SP2304 001: Threshold 1
SP2781 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2782 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3
To Next Page
Loading...
