Group 2000
D014/D015/D078/D079 5-84 SM
2828 TEdge Cor:Sp2 FC
Trailing Edge Correction for Special Paper 2: FC. Sets the strength of the bias
coefficient for the bias applied at the trailing edge when the image is transferred
from ITB to paper. Applied when printing in full-color mode on Special Paper 2.
7 Side1:PTR
12 Side2:PTR
[0 to 250/1%]
2829 TEdge SWT:Sp2 FC
Switch Timing for Special Paper 2: FC. Sets the switch timing that determines the
distance from the leading edge where the SP2828 settings are applied during
image transfer from ITB to paper. Applied only when printing in full-color mode on
Special Paper 2.
[-100 to 0/1 mm]
To Next Page
Loading...
