Group 2000
D014/D015/D078/D079 5-86 SM
2840 Sp2:FC:LLL Special Paper 2: FC Very Low
2841 Sp2:FC:LL Special Paper 2: FC Low
2842 Sp2:FC:ML Special Paper 2: FC Medium Low
2843 Sp2:FC:MM Special Paper 2: FC Medium
2844 Sp2:FC:MH Special Paper 2: FC Medium High
2845 Sp2:FC:HH Special Paper 2: FC High
These SPs set the standard values of the electrical charges that are applied to 1)
create bias for image transfer from drum to ITB, 2) create bias for image transfer
from ITB to paper (PTR), and 3) neutralize the charges on the both sides of the
paper to separate the paper from the ITB (SepDC, SepAC). These settings are
used when printing on Special Paper 2 in the full-color mode and are applied only
to the image area.
1 ITB
17 Side1:PTR
18 Side1:SepDC
19 Side1:SepAC
27 Side2:PTR
28 Side2:SepDC
29 Side2:SepAC
[10 to 200/ 1%
To Next Page
Loading...
