Ricoh D014 - Page 732

Group 5000
D014/D015/D078/D079 5-190 SM
proxy Port Number
064
This SP sets the port number of the proxy server used for communication
between the embedded RCG-N and the gateway. This setting is necessary to set
up the embedded RCG-N.
Note: This port number is customer information and is not printed in the SMC
report.
Proxy User Name
065
This SP sets the HTTP proxy certification user name.
Note: The length of the name is limited to 31 characters. Any character beyond
the 31st character is ignored. This name is customer information and is not
printed in the SMC report.
Proxy Password
066
This SP sets the HTTP proxy certification password.
Note: The length of the password is limited to 31 characters. Any character
beyond the 31st character is ignored. This name is customer information and is
not printed in the SMC report.
CERT: Up State
Displays the status of the certification update.
0 The certification used by the embedded RCG-N is set correctly.
1
The certification request (setAuthKey) for update has been received
from the GW URL and certification is presently being updated.
2
The certification update is completed and the GW URL is being
notified of the successful update.
3
The certification update failed, and the GW URL is being notified of the
failed update.
4
The period of the certification has expired and new request for an
update is being sent to the GW URL.
067
11 A rescue update for certification has been issued and a rescue
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA