Group 5000
SM 5-189 D014/D015/D078/D079
Service
Tables
RCG – C Registed
021
This SP displays the embedded RCG-N installation end flag.
1: Installation completed
2: Installation not completed
RCG – C Registed Detail
022
This SP displays the RCG device installation status.
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Type (N/M)
023
This SP displays and selects the embedded RCG-N connection method.
0: Internet connection
1: Dial-up connection
Cert. Expire Timing (DFU)
061
Proximity of the expiration of the certification.
062 Use Proxy
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
Proxy Host
063
This SP sets the address of the proxy server used for communication between
the RCG device and the gateway. Use this SP to set up or display the customer
proxy server address. The address is necessary to set up the embedded
RCG-N.
Note: The address display is limited to 128 characters. Characters beyond the
128 character are ignored.
This address is customer information and is not printed in the SMC report.
To Next Page
Loading...
