Group 5000
D014/D015/D078/D079 5-202 SM
This SP allows you to confirm and reset the IPv4 default gateway used by
the network for Ethernet and wireless LAN (802.11): aaa.bbb.ccc.ddd
DHCP (Ethernet/IEEE 802.11)
6
This SP code allows you confirm and change the setting that determines
whether the IP address is used with DHCP on an Ethernet or wireless
(802.11) LAN network.
[0 to 1 / 1 / 1]
0: Not used (manual setting)
1: Used
Active IPv4 Address
021
This SP allows you to confirm the IPv4 address that was used when the
machine started up with DHCP.
Active IPv4 Subnet Mask
022
This SP allows you to confirm the IPv4 subnet mask setting that was used
when the machine started up with DHCP.
Active IPv4 Gateway Address
023
This SP allows you to confirm the IPv4 default gateway setting that was
used when the machine started up with DHCP.
050
1284 Compatibility
(Centro)
Enables and disables bi-directional
communication on the parallel connection
between the machine and a computer.
[0 to 1 / 1 / 1 ]
0:Off, 1: On
052 ECP (Centro)
Disables and enables the ECP feature (1284
Mode) for data transfer.
[0 to 1 / 1 / 1]
0: Disabled, 1: Enabled
065 Job Spooling
Switches the job spooling on and off.
[0 to 1 / 0 / 1]
0: No spooling, 1: Spooling enabled
To Next Page
